Disinfectant & Sanitization Solution - Effective, Efficient And Safe

SMHS disinfectant & sanitization solution leverages short-wavelength ultraviolet technology, as a disinfection measure, to help reduce the transmission of COVID-19.

UV disinfection solution is based on a chemical free process & leaves no residue behind, needs no storage or handling of toxic or corrosive chemicals. The solution is fully automatic & requires no human intervention, thus eliminating the possibility human error in the disinfection process.

UV Tunnel

A non–thermal, non–chemical technology-based tunnels to disinfect & inactivate the infection.

UV Tunnel

Configuration

Model UC-LPAM
Target UV Dose @EOL 26,000 uW-sec/cm2
Maximum conveyor speed 0.5m's
UVC Emitters 10
Target Average Irradiance 4750 uW/cm2
UV tunnel active width 1.0m
UV tunnel active height 0.5 m
UV tunnel active length 3.5m - 4.5m
Model UC-LPAM
Voltage 220-440V / 50-60Hz (Single Phase)
Maximum power consumption 3.75kW
Control Panel Rating IP54
Control Panel MOC M.S (Optionally SS304)
Max lamp cable length (mtrs) 4.5

Fogging chamber

Fogging chamber, a special chamber designed as a walk through enclosure for personnel decontamination. A portable solution equipped with fog mist sprayer.

Specifications
Body of Tunnel (structure) Metal / 1” MS pipe / Fiber Reinforced Plastic Sheet.
Dimensions of Tunnel 4 ft. length * 4 ft. width* 7.6 ft. height
No. of Spray & Nozzles 5 Nos. (5‐way spraying)
Nozzle type With NRV (non‐return valve) spray/ fog mist spray
Operating Foot Switch with 5 sec preset timer instead of manual
Capacity of Nozzles Spray consumption 25 to 30 ml per person/td>
Liquid tank 50 LTR
Motor & pump 0.5 HP / 220 v/ Ac / 50Hz
Total Weight of Tunnel with accessories Approx. 50 kgs.
Approx time 5-10 seconds to cross chamber
Testing Medium Water Only
Get in touch to learn more!